Basic 2 Kit

Basic Kit – 1200 hrs

Each kit provided by Flying Legend includes the fuselage kit, the wing kit, the empennage kit, the flight control kit, the fixed landing gear kit, the aluminium tank kit and the canopy kit. Each kit includes also all the hardware parts (bolts, nuts, rivets and so on) required to assembly the aircarft.   A amateur builder requires approximately 1200 hrs to complete the basic kit.

The standard kit does not include the retractable gear. The retractable gear has to be selected in the option list

Entirely made in Aluminium 2024-T3/6061 -T6, the structure is calculated for a MTOW of 650,00 kg and a load factor of +6/-3G or 750,00 kg with a load factor of 4.4/-2.2G

 

 

 

What is included in the basic kit?

Fuselage kit

-entirely pre-assembled up to the central area (central box and fuselage spars completed)

-central area entirely riveted

-engine mount blocks included

– the skins which are not assembled (upper and lower) are provided with guideholes. The builder has to size the holes to the final size, cut and rimmer all the sides.

-hardware

The kit includes also the floor sheets, the upholstery internal side, canopy closure parts, roll-bar, extra luggage compartment parts, pedals support – SS cowling frame.

The fuselage has also inspection windows which allows the builder to easy access the internal parts of the aircarft.

 

 

Half Wing kit

-Spars and undercarriage compartment are manufactured by FL

– back skin entirely riveted to maintain the twist

– belly skin, rib nose, external flap conveyer provided with guideholes

-wheel compartment and internal flap conveyer have to drilled and assembled

-flaps and ailerons are pre pounched. The builder has to size the holes to the final size, cut and rimmer all the skins and nose.

-hinges flaps included unassembled

-hardware

Material supplied

Jig scale drawing 1:1 for ribs 1 and 13, flap and aileron root and tip. (to check the right twist)

 

Empennage kit

-Empennage provided pre-pounched with guideholes. The builder has to size the holes to the final size, cut and rimmer all the sides of the nose and the skins.

-hinge parts included

-hardware

Material supplied

Jig scale drawing 1:1 for tip and root ribs and also hole guide strap (to check the right twist)

 

Flight controls

The kit includes all the parts necessary to realize the flight control of the aircraft, the pedals and all the other elements in chrome molybdenum already welded and treated with powder paint by FL. The amateur builder will have to assemble the aluminium parts and all the other items where the bearings and uniball are placed.

 

 

Fixed Undercarriage

-leaf spring made of aluminium,, with 4 supports to fix the structure,

– two 6″ wheels which are working with manual brakes,

– a front undercarriage with a 4″ wheel

ATTENTION: At the time of the order please specify if you would like the fixed or retractable undercarriage option as the fuselage and the wings have to be structured accordingly – also the front undercarriage is suitable for our engine mount.


 

Tank kit

-n.2 unassembled aluminium tanks (15.5 gal each) including the required accessories and harware  to install them in the wings

– accessories: fuel caps; fuel vent; fuel inlet, fuel drain valve;

-the mastic is not supplied due of the fact that it expires so it is recommended to buy it at the time of usage.

Resin Kit

-cockpit cover

-bottom rudder tip

-wing cover

-stabilizer cover

-dorsal fin

Canopy kit

– clear bubble canopy (grey and blu available)

-frame

The canopy  is manufactured on a tailor made stamp, designed from FL.

It provides a great visibility either from the front and the rear seat.

 

 

 

 

 

 

 

The items/service below are NOT included in the standard kit offer but you can add them as an option

-Wheel Fairing Kit

 

 

Toe brakes on pedals

 

-Parking break 

-Retractable gear kit

-main and nose powder coated landing gear

-mechanics

-bushings

-hydraulic cylinders

-hydraulic power pack (12V)

-switches and electric components

-wheels with hydraulic brakes

-emergency manual pump to release the gear in case of failure

-hose and fittings

 

 

Fuel sensor 

 

 

-Assembled tanks service

 

 

-Explode Safe Bladder Tanks

– n.2 bladder tanks (total capacity 25 gallons) complete with accessories to place them in the wings,

-caps (NEWTON),

-resin or aluminum covers

 

-Resin Tip kit

-elevator tip

-stabilizer tip

-fin tip,

-rudder tip

-half wing tips

Upper and Lower Cowl kit

Clear Wing tips

 

-Canopy assemblage

 

 

-Engine Mount kit

It is suitable for Rotax Engine, either 912 and 914.

It can be also used for the experimental engine of 140 hp.

-Rotax Ring

If you are going to purchase the Rotax 914 please do not include it as it is already provided by Rotax.

 

-Engine mount isolator (4 units)

 

 

Standard seat

made of resin, not fabric covered

-Structural seat

The structural seats allow the belts to be installed on the seats directly and not on the aircraft structure.

They are not fabric covered resin seats  with aluminum structure.

This seat is 2,36 inch higher, therefore has to be evaluated for pilots taller than 5,9ft

Standard seats with fabric cover and FL logo

-Rear brake  (only manual)

-Electric trim

Throttle system

Rear instrument panel

Instrument panel is provided plain as we do not know which instruments the customer would like to add.

However if the customer already knows which instruments he would like, we can laser cut the holes.

The same applies for the front one, which is already included in the price of the kit.

 

 

-Entry step

-Fuel system kit

 

Faux Exhaust Ducts

Spinner and backing plate

Engine Accessories kit

It includes

-fuel line Rotax engine with supercharger (it does not include the 2 electric fuel pump)

-oil tank supports

-radiator supports (it does not include the radiator)

-water hose supports

The image below will show you the items supplied and their installation