Estimated work time: approximately 1800 /2000 ore
Each kit provided by Flying Legend includes the fuselage kit, the wing kit, the empennage kit, the flight control kit, the fixed landing gear kit, the aluminium tank kit and the canopy kit. Each kit includes also all the hardware parts (bolts, nuts, rivets and so on) required to assembly the aircarft. A amateur builder requires approximately 1800/2000 hrs to complete the basic kit.
The standard kit does not include the retractable gear. The retractable gear has to be selected in the option list
Entirely made in Aluminium 2024-T3/6061 -T6, the structure is calculated for a MTOW of 650,00 kg and a load factor of +6/-3G or 750,00 kg with a load factor of 4.4/-2.2G
-entirely assembled up to the central part (central box and fuselage spars are provided complete) with holes of 2.4 mm, but not riveted,
-the builder has to rivet and complete only the the bulkheads, including also the connecting “L” slabs to the fuselage omega,
-the remaing skins are laser pre-punched so that you can duplicate the holes to the bulkheads (upper and lower of the fuselage)
-the kit also include the floor sheets, the internal side upholstery, canopy closure parts, roll bar, extra luggage compartment parts, engine mount blocks, pedals parts – SS cowling frame.
Half Wing kit
-Spars and undercarriage compartment are manufactured by FL
– back and ventral skin are laser pre-punched at 2.4 mm,
-ribs, nose, flap conveyor , wheel compartment have to be drilled and assembled.
-Flap and aileron pre punched for ribs placament, trailing edge entirely pre punched with guide holes (4 per each rib), nose to be drilled, flap hinges to be assembled.
Jig scale drawing 1:1 for ribs 1 and 13, for half wing nose, flap and aileron root and tip.
-the parts are pre-punched for ribs placament,
-trailing edge skin with guide holes (4 per rib),
-nose to be drilled, hinges parts included.
Jig scale drawing 1:1 for tip and root ribs and also hole guide strap.
Flight control kit
The kit includes all the parts necessary to realize the flight control of the aircraft:
-the pedals and all the other elements in chrome molybdenum already welded and treated with powder paint by FL,
-the amateur builder will have to assemble the aluminum parts and all the other items where the bearings and uniball are placed.
Fixed Undercarriage kit
The kit includes a leaf spring made of 2024-T3, with 4 supports to fix the structure, two 6″ wheels which are working with manual brakes, a front undercarriage with a 4″ wheel.
ATTENTION: At the time of the order please indicate if you would like the fixed or retractable undercarriage option as the fuselage and the wings have to be structured accordingly – also the front undercarriage is suitable for our engine mount.
N.2 aluminium tanks including the required accessories to install them in the wings, rivets.
The mastic is not supplied due of the fact that it expires so it is recommended to buy it at the time of usage.
-bottom rudder tip
-clear canopy (blue and grey colour are optional)
The items/service below are NOT included in the standard kit offer but you can add them as an option
Wheel Fairing Kits
Toe brakes pilot pedals
Retractable landing gear kit
-Main and nose landing gear powder coated;
-hydraulic power pack (12V);
-switches and electric components,
-wheels with hydraulic brakes,
-emergency hydraulic hand pump kit,
-hose and fittings.
Fuel tanks glued and assembled
Explode Safe Bladder Tanks
N.2 Bladder tanks (total capacity 25 gallons) complete with accessories to place them in the wings,
resin or aluminum covers.
n.2 fuel sensor
n.2 Fuel Caps
Clear wing tips
Engine mount suitable for Rotax 912/914
Engine ring (not required for Rotax 914)
Engine mount isolators (4 pieces)
made of resin, not covered
not covered resin seat with aluminum structure, this seat is 2,36 inch higher, therefore has to be evaluated for pilots taller than 5,9ft
Standard seat with cover
Rear brake (only manual)
Rear instrument panel
Faux Exhaust Ducts
Spinner and backing plate
Engine Accesory Kit
- -fuel line Rotax engine with supercharger (it does not include the 2 electric fuel pump)
- -oil tank supports
- -radiator supports (it does not include the radiator)
- -water hose supports
The image below will show you the items supplied and their installation